
Add to Cart
Width Of Mesh 7 Ft Mesh Size 1 Inch Electric Welded Wire Mesh Machine
Introduction of Electric Welded Wire Mesh Machine:
1. Both of the line wire and cross wire are fed from wire coils automatically.
2. The side cutters can be adjusted to make mesh rolls at same time. The machine has 4 cutters in the middle of the machine which to make 5 rolls mesh at same time.
3. The welding time and welding current can be adjusted on the control panel to adjust the welding degree.
4. The welding transformers have 8 degrees and can be adjusted for different wire diameters.
5. The mesh roll length can be set by counter switch on the control panel. (For example, if 25m mesh length, 25mm cross wire space, the number should set 1001.)
6. About electric parts
New type machine use Delixi brand breaker, Schneider brand electric parts.
Old type machine use common brand electric parts, no inverter.
7. About the steel plate and bottom material
On the back of the new type machine, we use 1.5mm steel plate, on the bottom we use square steel;
Old type machine use 0.2mm steel plate and angle iron, not stable.
8. About the motor and reducer
New type machine use Mengniu brand main motor & Guomao brand reducer, which are the best quality in China. The quality can be guaranteed.
Technical Parameters of Electric Welded Wire Mesh Machine:
Model | DX-DNW-5 | Wire diameter | 1.0-1.8mm |
Mesh size | 12.5x12.5, 25x25, 25x50,50x50,75x75 | ||
Mesh width | 2000mm | Welding electrodes | 161pcs |
Welding speed | 80-120 rows/min | Welding transformer | 85KVA*7pcs |
Measurement | 3.7*1.5*1.6m | Machine weight | 4.6T |
Electric motor | 5.5kw | Labor cost | 1 person |
Applications of Electric Welded Wire Mesh Machine:
Machine guard, animal fence, flower and wood fence, window guard, passage fence, poultry cage, egg basket and home office food basket, paper basket and decoration. The welded wire mesh is mainly used for general building exterior walls, pouring concrete, high-rise residential buildings.
Photos of Electric Welded Wire Mesh Machine: