Anping Dixun Wire Mesh Products Co., Ltd
Anping Dixun Wire Mesh Products Co., Ltd
Add to Cart
Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine
Introduction of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
The cold rolling steel bar ribbed machine is to roll surface of steel round bar to form three crescent sides.
Raw material is hot-rolled low carbon steel round bar.
Main Features of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
1. Gearbox Reducer, large torque, low noise, durable.
2. Advanced frequency inverter technology, can save 40-60% of electricity consumption.
3. The line speed can be up to 90 meters per minute, improve production efficiency.
4. Technology applied on the vibration aging process, eliminating the pre-stressing.
Rolling mill and speed:
If the reduced diameter is less then 1mm, only need to use single rolling mill-6pcs rolling wheels. (For example, inlet round wire 8.5-9mm, outlet ribbed wire 8mm.) But the wire reducing and ribbing are doing on one rolling mill machine, the rolling speed is max.90m/min.
If the reduced diameter is more than 1mm, less than 2mm, need to use two rolling mills-12pcs rolling wheels. (For example, inlet round wire 9-10mm, outlet ribbed wire 8mm.) The wire reducing and ribbing are doing at 2 rolling mill machines, the rolling speed can be up to max.120m/min.
Process:
Raw material–Spool off–Sheller–Dry Lubrication–NO.1 rolling mill machine for reducing–Coiling.
Technical Parameters of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
| Model | 30000T |
| Raw material inner diameter | 800 mm |
| Raw material outside diameter | 1,200 mm |
| Raw material height | 1,700 mm |
| Raw material | Max 2,000 kg |
| Control technical | Touch screen + PLC+ Encoder |
| Raw material diameter | Φ5.5-14mm |
| Finished ribbed bar diameter | Φ5-12mm |
| Drawing speed | 5-11mm, Max.180M/min 12mm, Max.150M/min |
| Ribs bar measurement length | 1-12m |
| Speed adjusting way | Frequency inverter |
| Cut off error | ±5mm |
| Cutting way | Servo cutting |
| Main motor | 75kw |
| Servo cutting rate | 18KW |
| Ribs rolling mill material | Tungsten carbide |
| rolling mill diameter | Ф210mm |
| Cooling way | Water cooling |
| Butt welding machine | 1 unit |
| Air compressor | 0.18 m³/min @ 8 bar |
| Rolling press times | 2+1 |
| Cutting length | 1-6M/12M |
| Rolling mill adjusting way | Motor give pressure |
| Installation length | 40*4M |
| Power consumption: | 10kw per ton |
| Manpower | 2 persons |
| Installation & training time | 10-15 days |
Applicatios of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
This production line is mainly to make 5-10mm reinforcing steel bars with three-side crescent shape ribs. The finished product is widely used in highway, road, city planning and construction works.
Photos of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine
