Anping Dixun Wire Mesh Products Co., Ltd
Anping Dixun Wire Mesh Products Co., Ltd
Add to Cart
Copper Electrode Water Cooling Panasonic PLC Reinforcing Mesh Panel Welding Machine
Reinforcing Mesh Panel Welding Machine Introduction:
Reinforcing mesh panel welding machine, also called BRC mesh welding machine, Construction mesh welding machine.
The reinforcing mesh panel welding machine is used to make steel rebar mesh, road mesh, building construction mesh, etc. With more than 20 years experience in design and manufacture, our BRC mesh welding machine is featured by high capacity, easy operation, and precise control.
Reinforcing Mesh Panel Welding Machine Features:
1. Feeding material:
The warp wire and weft wire are straightened and cutted from coil wire material ,realized by auto straightening and cutting machine.
The warp wire are placed on a corresponding wire penetrating mold by worker, and the weft wire will be automatic falling down one by one ,from the weft wire system
2. Welding mesh panel system:
The main machine starts welding and adopts a synchronous control technology, both branch control welding time and welding time are controlled by a Mitsubishi PLC digital programming system, and the mesh opening size can be adjusted only by direct input on a touch screen; and it could be exist different weft distance on one piece of one mesh sheet
3. Drawing mesh panel system:
Panasonic ( Japan ) step motor controls the whole automatic mesh panel drawing process until one mesh panel finished, and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
Reinforcing Mesh Panel Welding Machine Technical Parameters:
| Model | DX-GWC-2500D | DX-GWC-3000D |
| Wire diameter | 3.0-8.0mm | 3.0-8.0mm |
| Mesh width | 2500mm | 3000mm |
| Mesh hole size | From 50*50mm to 200*200mm | From 50*50mm to 200*200mm |
| Welding spots | 40PCS | 60PCS |
| Welding speed | 45-70 times per min | 45-65 times per min |
| Welding transformer | 160KVA*7PCS | 160KVA*10PCS |
| Pulling mesh system | By servo motor Panasonic | By servo motor Panasonic |
| Line wire ytpe | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Cross wire type | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Main motor power | 7.5KW | 11KW |
| Power consumption | 11KW/H | 14KW/H |
| Upper copper electrodes | square | square |
| Down copper electrodes | square | square |
| Labor cost | Two persons | Two persons |
Reinforcing Mesh Panel Welding Machine Applications:
The reinforcing mesh panel is mainly used in municipal bridge, highway bridge deck pavement, old bridge deck reconstruction, bridge pier crack prevention, building floor, concrete pavement, airport runway, tunnel, high-rise construction.
Reinforcing Mesh Panel Welding Machine Packing:
Reinforcing Mesh Panel Welding Machine Photos: