Anping Dixun Wire Mesh Products Co., Ltd
Anping Dixun Wire Mesh Products Co., Ltd
Add to Cart
Wire Diameter 5-12mm Schneider Switch Reinforced Welded Wire Mesh Welding Equipment
Reinforced Welded Wire Mesh Welding Equipment Introduction:
Reinforced Welded Wire Mesh Welding Equipment is also called concrete reinforcing mesh welding machine, BRC mesh welding machine. The Reinforced Welded Wire Mesh Welding Equipment is used to produce reinforcing mesh. The Reinforced Welded Wire Mesh Welding Equipment adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization.
Reinforced Welded Wire Mesh Welding Equipment Features:
1. The Reinforced Welded Wire Mesh Welding Equipment control system Panasonic PLC control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.
2. Cross wire hopper: the stepper motor drives the disk-type device to automatically drop wires, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no wire in the hopper, the rebar welded mesh welding machine will stop running automatically.
3. Mesh pulling mechanism: Mitsubishi servo motor supporting planetary reducer drives pneumatic clamping mesh pulling device to ensure the stability of the system and the standard size of the welded mesh.Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.
4. Water-cooled welding electrodes and a new type of special transformer for water-cooled welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.
5. Low-voltage electrical appliances are made of Schneider, Tianzheng, Mingwei and other well-known brands to ensure the efficient and stable operation of the equipment.
6. The Reinforced Welded Wire Mesh Welding Equipment will stop working automatically if there is no cross wires in hopper device.
Reinforced Welded Wire Mesh Welding Equipment Technical Parameetrs:
| Model | DX-GWC-2500A | DX-GWC-3000A | DX-GWC-3300A |
| Width of mesh | 2500mm | 3000mm | 3300mm |
| Line wire space | 100-300mm(adjustable) | 100-300mm(adjustable) | 100-300mm(adjustable) |
| Cross wire space | 100-300mm(adjustable) | 100-300mm(adjustable) | 100-300mm(adjustable) |
| Wire diameter | 5-12mm | 5-12mm | 5-12mm |
| Welding electrodes | 24PCS | 30PCS | 32PCS |
| Welding transformer | 160KVA*12PCS | 160KVA*15PCS | 160KVA*16PCS |
| Welding press type | Mechanical | Mechanical | Mechanical |
| Industrial voltage | 220V/380V/415V/440V | 220V/380V/415V/440V | 220V/380V/415V/440V |
| Welding way | Thyristor synchronous control | Thyristor synchronous control | Thyristor synchtonous control |
| Line wire type | Pre-cut | Pre-cut | Pre-cut |
| Cross wire type | pre-cut | Pre-cut | Pre-cut |
| Welding speed | 40-65 times per min | 40-65 times per min | 40-65 times per min |
| Overall dimension | 15m*4.2m*2.2m (L*W*H) | 15m*4.7m*2.2m(L*W*H) | 15m*5.2m*2.2m(L*W*H) |
| Total weight | 9.5T | 11T | 12T |
| Labor required | 2 workers | 2 workers | 2 workers |
Reinforced Welded Wire Mesh Welding Equipment Applications:
The reinforcing mesh panel is widely used in bridge engineering, highway and municipal engineering, steel mesh is mainly used in the pavement of municipal bridge and highway bridge, concrete laying of highway, reconstruction of old bridge deck, anti-crack of bridge pier, etc.
The spacing of the mesh is generally 100-200mm, and its diameter should be 6-l2mm. Equal spacing should be used in the longitudinal and transverse direction of the steel mesh. The thickness of the protective layer between the welding mesh and the top surface should not be less than 15mm.
Reinforced Welded Wire Mesh Welding Equipment Packing:
Reinforced Welded Wire Mesh Welding Equipment photos: