Anping Dixun Wire Mesh Products Co., Ltd
Anping Dixun Wire Mesh Products Co., Ltd
Add to Cart
Mesh Width 2400mm Road Mesh Concrete Reinforced Rebar Welded Mesh Machine
Concrete Reinforced Rebar Welded Mesh Machine Introduction:
The Concrete Reinforced Rebar Welded Mesh Machine is specially used for the production of steel mesh.Welding speed is fast. Working principle through resistance welding. The machine can weld rebar, round steel and galvanized wire.
The concrete reinforced rebar welded mesh machine adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization. Separate the welding transformer to reduce the requirement of power transformer.
Concrete Reinforced Rebar Welded Mesh Machine Features:
1. The concrete reinforced rebar welded mesh machine control system adopts PLC automatic control system, combined with Weinview touch screen, can directly input and display operating parameters, intelligent and easy to operate.
2. Cross wire hopper: the stepper motor drives the disk-type device to automatically drop wires, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no wire in the hopper, the concrete reinforced rebar welded mesh machine stop stoping automatically.
3. Line wire feeding mechanism: Mitsubishi servo motor is equipped with planetary reducer to drive pneumatic compression wire feeding device to send line wire to the welding position. The concrete reinforced rebar welded mesh machine start to weld automatically.
4. The reinforced rebar welded mesh machine will stop working automatically if there is no cross wires in the hopper device.
5. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.
6. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.
7. The concrete reinforced rebar welded mesh machine is equipped with 12 PCS water cooled transformers.Each welding transformer is 160KVA.
8. We could make different models according to your requirements.
Concrete Reinforced Rebar Welded Mesh Machine Technical Parameters:
| Model | DX-GWC-2500A | DX-GWC-3000A | DX-GWC-3300A |
| Width of mesh | 2400mm | 3000mm | 3300mm |
| Line wire space | 100-300mm(adjustable) | 100-300mm(adjustable) | 100-300mm(adjustable) |
| Cross wire space | 100-300mm(adjustable) | 100-300mm(adjustable) | 100-300mm(adjustable) |
| Wire diameter | 5-12mm | 5-12mm | 5-12mm |
| Welding electrodes | 24PCS | 30PCS | 32PCS |
| Welding transformer | 125KVA*12PCS | 125KVA*15PCS | 125KVA*16PCS |
| Welding press type | Pneumatic | Pneumatic | Pneumatic |
| Industrial voltage | 220V/380V/415V/440V | 220V/380V/415V/440V | 220V/380V/415V/440V |
| Welding way | Thyristor synchronous control | Thyristor synchronous control | Thyristor synchtonous control |
| Line wire type | Pre-cut | Pre-cut | Pre-cut |
| Cross wire type | pre-cut | Pre-cut | Pre-cut |
| Welding speed | 40-65 times per min | 40-65 times per min | 40-65 times per min |
| Overall dimension | 40m*4.2m*2.3m | 40m*4.7m*2.3m | 40m*5.2m*2.3m |
| Total weight | 11T | 13T | 15T |
| Labor required | 2 workers | 2 workers | 2 workers |
| Falling mesh way | Automatic | Automatic | Automatic |
Concrete Reinforced Rebar Welded Mesh Machine application:
The concrete reinforced rebar welded mesh are widely used in industrial and civil housing floors, roof, wall, concrete pavement, bridge pavement, airport runway, tunnel lining, box culvert, wharf floor, precast components and other fields
Concrete Reinforced Rebar Welded Mesh Machine Packing:
Concrete Reinforced Rebar Welded Mesh Machine Photos: